ADSS Dead End Set is a specific type of dead-end hardware used in overhead powerline installations to provide secure termination and mechanical support to the conductor at the end of a span. It is designed to withstand the mechanical forces and stresses experienced by the powerline and ensure reliable performance. It consists of several key components, including a preformed rod, armour rods, a housing or clamp, and associated hardware.
| Part No. | Conductor Range (mm) |
|---|---|
| 1.11-3010*L*R | 10.0-11.0 |
| 1.11-3020*L*R | 11.0-12.0 |
| 1.11-3030*L*R | 12.0-13.0 |
| 1.11-3040*L*R | 13.0-14.0 |
| 1.11-3050*L*R | 14.0-15.0 |
| 1.11-3060*L*R | 15.0-16.0 |
| 1.11-3070*L*R | 16.0-17.0 |
| 1.11-3080*L*R | 17.0-18.0 |
| 1.11-3090*L*R | 18.0-19.0 |
| 1.11-3100*L*R | 19.0-20.0 |
Note: L or R Denotes Right or Left hand lay.